Specialized manufacturer of water quality related apparatuses such as pH meter, pH Neutralizer.
The size is about 1/2 of the conventional mixer
Chemical mixer CCM
 |
A lightweight Mixer. No requires of the mixer support, because of the lightweight. It can be used at a volume of 500 to 2000L tank.
|
|
DWG/Catalogue | Relevant |
Advantages
| ・A high efficiency impeller that has been newly developed produces great mixing force. |
|
・The size is 1/2 of that of conventional mixers (belt-driven type). It is a miniaturized and lightweight type that can installed onto a PE tank or PVC tank. |
| ・Weight reduction has been realized by a combination of AES, aluminum, etc. |
|
・By employing pipe exterior specifications, the metal parts do not contact liquid, thereby realizing excellent corrosion resistance. |
|
・The timing belt method is employed. Low noise and long service life of the belt have been realized by our proprietary design. |
| ・Received a 2004-2005 Good Design Award. |
Applications
| ・Mixing in a reaction tank made of plastics |
| ・Mixing of corrosive liquid |
| ・Dissolution of powder, granular and flaky chemicals |
| ・Mixing for reaction in a pH neutralization tank or water treatment plant |
| ・Homogenization of liquid |
Specifications
| Type | Type CCM-100 | Type CCM-150 | |||
| Output | 100W | 150W | |||
| Voltage | 100V(single phase) | 200V(single phase) | 200V(three phase) | 380V(three phase)50hz | |
| Rated current | 2.2/2.3A |
0.7/0.64A | 0.9/0.85A | 0.5A(50Hz) | |
| Number of revolutions | 370/450rpm | ||||
| Maximum mixing capacity | 1,000L | 2,000L | |||
| Ambient temperature for use | 40℃ | ||||
| Maximum operating temperature | 80℃ | ||||
| Maximum liquid viscosity | 300cP | ||||
| Maximum liquid specific gravity | 1.3 | ||||
| Method of speed reduction | Timing belt | ||||
| Protection class | IP54 or equivalent | ||||
| Installation | JIS10K65A Flange | ||||
| Shaft |
φ16×900L made of SUS316-grade stainless steel |
||||
| Impeller |
φ175/φ145(50Hz/60Hz) made of PPC 3-vane propeller |
φ195/φ165(50Hz/60Hz) made of PPC 3-vane propeller
|
|||
| Optional items |
Change in shaft length (maximum: 1,200L), change in shaft material, change in impeller diameter, change in impeller material (PPS, PVDF), pipe exterior |
||||
| Main body weight | About 10kg | ||||
*The maximum mixing capacity shows performance with clear water. The mixing capacity decreases if the solution to be mixed has a viscosity or specific gravity that is higher than that of clear water.
*The standard material of the liquid contact parts are: SUS316-grade stainless steel for shaft, and PPC for the impeller.
*Mixing of a solvent, etc. cannot be performed.
*The mixer cannot be used in an explosion-proof area.
Outline drawing/catalogue
 |
 |
Relevant products
- (+81) -3-3946-3201
- (+81) -3-3946-3210
