Specialized manufacturer of water quality related apparatuses such as pH meter, pH Neutralizer.

・For the purpose of miniaturization and weight reduction, titanium is used for the shaft,

   and PPS resin is used for the impeller.  The weight is only 2.8 - 3kg!

・Because the mixer is miniaturized and lightweight, no dedicated platform is required

   when installing the mixer onto a tank.

・An ultra small high efficiency impeller that has been developed by exploiting the technical expertise

　of the Shipbuilding Research Center of Japan.

・By employing the ultra small high efficiency impeller, the mixer can be installed onto

　the mouth of a drum, etc. as it is.

・By employing the ultra small high efficiency impeller and the stator, there is hardly

　any occurrence of cavitation.

・With the impeller and shaft being set beforehand, no on-site assembly work is required.  

　If the JIS 5K 50A flange is detached, 

　the mixer becomes of the PF2B screw-in type as well.

・Since no gear speed reduction is employed, there is hardly any sound or vibration.

・Because materials such as PP/titanium/PPS/PTFE are used as standard specifications,

　the mixer has excellent corrosion resistance and is best suited to the dissolution of chemicals.

・Using the best materials that have been chosen, high cost and high performance are realized.

・The materials of the guide and stator of the standard type are PP,

　of which heat resistant temperature is 80℃

　(those made of PVDF have a heat resistant temperature of 100℃).

・Put the double-oil seals to the motor side and housing of main body side,

　that prevent the ingress of corrosive gases.

・We won the special prize of Smaller Enterprise Agency’s Director in the 1997.

　It is possible to install to the outside field, and we stuck to the chemical mixer's appearance.

・Handy grip which is holding the chemical mixer by hands to use.