![]() |
2 types are available in a continuous treatment method: 0.5 - 1.7m3/h and 1 - 4m3/h in treatment capacity.
|
|
Outline drawing | Relevant |
Advantages
|
|
|
|
|
|
|
|
|
|
|
Applications
・pH neutralization treatment of drainage in a factory. |
|
・pH neutralization treatment of drainage in an experiment. |
・pH neutralization treatment of CIP drainage in a food processing factory, etc. |
Specifications
Type | CPU-2 |
CPU-4 |
|
Object of treatment | Acid and alkali drainage | ||
Amount of water treated | 0.5~1.7m3 | 1~4m3 | |
pH of raw water |
R:2-point control pH 3.0 - 11.0 S:1-point control (acid side) pH 3.0 - 7.0 A:1-point control (alkali side) pH7.0 - 11.0 |
||
Raw water temperature | 5~40℃ | ||
Control method | Division proportional control, twin timer control, ON/OFF control | ||
pH of water to be treated | pH5.8 - 8.6 | ||
Raw water SS concentration | 50mg/L or less | ||
Ambient environment | Indoors or outdoors | ||
Neutralizing chemical | Acid side | Sulfuric acid 10 - 30% | |
Alkali side | Sodium hydroxide 10 - 20% | ||
Pipe diameter | Inflow port | 25A TS universal ball valve | 40A TS universal ball valve |
Outflow port | 50A Female thread | 50A Female thread | |
Neutralization tank drain | 5A Plug stoppage | ||
Chemical tank drain | 5A Plug stoppage | ||
Flow meter | 25A Area flow meter | 40A Area flow meter | |
Neutralization tank | 450L Polyethylene-made Square-shaped | 1000L Polyethylene-made Square-shaped | |
Neutralization tank mixer |
Driven by timing belt 0.1kW Impeller material: made of PP containing carbon |
||
Chemical tank mixer |
Direct drive 45W Shaft material: made of SUS316-grade stainless steel Impeller material: PPS Waterproofness: IP54 |
||
Chemical tank mixer | Metering pump 300/360cc/min 50/60Hz 40W 100V/200V single phase | ||
Alkali injection pump | Metering pump 300/360cc/min 50/60Hz 40W 100V/200V single phase | ||
Acid tank | 150L Polyethylene-made Square-shaped | ||
Alkali tank | 150L Polyethylene-made Square-shaped | ||
Chemical tank liquid level gauge |
Float liquid level meter Lamp: Normal - Blue LED Water shortage - Red LED With no voltage alarm contact (a- and b- contacts) |
||
pH indication and adjustment meter | pH0 - 14.00 Transmission output DC4 - 20mA Insulation type | ||
pH memorizing and adjustment meter | pH0 - 14.00 Data is memorized usually at intervals of 10 seconds Data retrieval is done by using attached software into EXCEL. | ||
Power supply | 100V/200V single phase | ||
Base | Made of polypropylene | ||
Alarm contact | pH discharge abnormality | Voltage-applied contact | |
Chemical tank water shortage alarm | No voltage contact |