PE-11N(with control functions pH/ORP Indication adjustment meter)

pick up

Hydroponics equipment
A miniaturized nutrient solution circulation system MSOE-100

Compact size nutrient solution circulation system. Usable for experimental solution, small size plant factory and horticultural facility.
Digital chemical mixer
TCMD

High performance compact mixer with DC brushless motor. Rotation speed is controllable by external signal.
Chemical water pump
CEMPON

Excellent anti-corrosion performance has been realized by employing CFRPP.Being miniaturized and light in weight, carrying it and its maintenance are easy.

pH/ORP meter that can be installed outdoors, of which cost performance was pursued.

Its LCD with a large backlight indicates the measured value of pH/ORP,

control point, control direction, whether there is control or not, current value,

and temperature.

Advantages

・It enables the current settings to be made at the time of an error or calibration, thus taking

account of safety.

・The JIS method or USA method can be chosen as the automatic calibration method.

・ON/OFF control, time division proportional control, or twin timer control can be chosen.

・The DC output can be scaled.

・It has drip-proof construction that can also be used outdoors (IP54 or equivalent); it is equipped with

a sunshade cover.

Applications

・pH neutralization or oxidation/reduction treatment of drainage in the chemical industry, etc.

・Incorporation of the apparatus of each process.

・pH measurement and control in hydroponic culture, etc.

・pH measurement and control of drainage from cleaning.

・pH measurement and control for drainage from experiments, etc.

Specifications

Name		PH(ORP) indication and adjustment meter
Type		PE-11N
Indication		LCD(with backlight)
Range of measurement		pH:0.00 - 14.00　ORP:－999 - ＋999mV　Temperature:0 - 100℃
Resolution		pH：0.01pH　　ORP：１mV
Temperature compensation		pH automatic temperature compensation　Temperature compensation range: 0 - 60℃
Temperature compensation element		6.8kΩ・500Ω・Pt1000Ω
Calibration	Automatic calibration	With automatic calibration solution judgment functions pH6.86 and either pH4.01, 9.18, or 1.68 (JIS) pH7.00 and either 4.00 or 10.00 (USA)
	Manual calibration	pH6.86, 7.00 and solutions that differ from them by 2pH or more
Control output		Control: ２ points　No voltage contact output　Maximum resistance load capacity: AC250V3A Zone alarm: １ point　No voltage contact output maximum load capacity: AC250V3A
Control method		ON/OFF control, time division proportional control, twin timer control, zone alarm, ON/OFF relay output
Control input		Output: P1, P2 only　External voltage-applied signal: １ point (EXT)AC100 - 240V　External contact: 3 points (LC1, 2, 3) no voltage contact
Transmission output		DC4 - 20mA (maximum load resistance: 500Ω) *Error current settings can be made.
Power supply		Any voltage between AC100V and 240V
Power consumption		10VA (at no load)
Protective construction		Drip-proof construction: IP54 or equivalent　(when using sunshade cover)
Dimensions		138(W)×138(H)×175(D) mm
Weight		About 2kg
Standard accessories		Sunshade cover

Specialized manufacturer of water quality related apparatuses such as pH meter, pH Neutralizer.